TC215 Specification

 

Monitor specification

TyrePal heavy duty tyre pressure monitorThe TC215 can monitor up to 22 wheels and displays the pressure and temperature of the tyres. When a trailer is connected, pushing a button establishes a wireless data link between the monitor and the trailer tyres.

Pressure alert levels can be set for each axle on the tractor unit and a single setting for all the tyres on the trailer. The high temperature alert level applies to all tyres. Clear and distinct alerts are given for air loss, low pressure, high pressure and high temperature.

Warnings are also given if a sensor signal is lost, if a sensor battery is low, or when the monitor battery needs recharging.

The monitor automatically shuts down when not in use and reactivates as vehicle is used. It continues to check pressures once every hour while in the sleep mode so that warning of any problem such as a slow puncture overnight can be given immediately on starting up. It is supplied with a plug for the vehicle power socket and a fused connector that can be hard wired.

Dimensions 115 x 73 x 27mm, weight 132g.Clear LCD screen with automatic backlight has view size 80 x 40mm.
Power Powered by internal lithium battery recharged from vehicle power supply. Automatically shuts down when not in use and reactivates as vehicle is used. Charger input 12 to 24V dc.
Mounting Supplied with robust articulated mount with suction or screw fitting. Simple dashboard stand is also supplied.
Display Continuously cycles through all wheel positions and displays pressure and temperature for each tyre. Additional detail is displayed as required.
Alerts Bright red flashing LED, plus audible alarm. Audible alarm can be silenced by pressing any button.Distinct alerts are given for the following conditions:

  • Air loss (puncture etc.)
  • Rapid air loss (blow-out)
  • Pressure below user-set threshold
  • Pressure above user-set threshold
  • Temperature above user-set threshold

Warnings are also given if the sensor signal is lost, if a sensor battery is low or when the monitor battery needs recharging.

Units User selected. Pressure: Bar or psi, Temperature: °C or °F

Monitor mounting options

TC 215 TPMS Monitor

Screen fixing – robust articulated mount

The monitor has a robust articulated mount that can be attached to the screen with a strong suction pad or can be permanently attached with a screw fitting.

Sensor specification

Sensor Specifications TCSE External   TCSE Sensor TCSF Flow through  TCSF sensor only TCSI InternalTCSI Sensor isolated
Dimensions 28 x 24.5 (length x diameter) excluding security shroud.
29.5 x 29.5mm  including shroud
52 x 26 x 23.5mm 60 x 31 x 20mm without valve.Valve stem 70mm.
Weight including battery 14g/19g 23g 33g
Battery Replaceable CR1632 Replaceable CR1632 Non-replaceable
Battery life 2 years 2 years 5 years
Operational temperature

-40°C to 80°C

Storage temperature

-40°C to 85°C

Pressure range

0 to 13 bar (0 to 188psi)

Pressure accuracy

±0.1bar (±1.5psi)

Temperature accuracy

±3°C

Transmission power

<10dBm

Transmission frequency

433.92MHz

Transmission range

Typically >7m in vehicle when screened by bodywork etc. Range can be extended with signal repeater.